Utax P-C3570DN Manual de usuario descargar pdf (Pagina 240)

A-7

Installing the Memory Modules

IMPORTANT Remove any USB memory that is attached to the

printer's USB memory slot.

1 Power off the printer and unplug the printer power cord.

2 Unscrew two screws at the back of the main controller board.

3 Pull out the main controller board gently.

4 Remove the memory module from its package. Aligning the cutouts

of the memory module with the matching keys of the socket, carefully

plug the memory module into the memory socket until it clicks in

place.

5 Push down the memory module to secure.

6 After you finish installing the memory modules, reinstall the main

controller board and fasten it with screws.

Removing a Memory Module

To remove a memory module, remove the main controller board, then

carefully push out the two socket clamps. Ease the memory module out

of the socket to remove.

CAUTION Do not plug the memory module backwards.

Main Controller Board

1 2 ... 235 236 237 238 239 240 241 242 243 244 245 ... 254 255

Sin comentarios

Utax P-C3570DN Manual de usuario Pagina 240