Utax P-4030DN Manual de usuario descargar pdf (Pagina 47)

2-25

Preparation before Use

Loading Paper into the MP (Multi-Purpose) Tray

The multi purpose tray will hold up to 100 sheets of A4 or smaller plain paper (80 g/m²).

The multi purpose tray accepts paper sizes from A4 to A6 and Hagaki and from Legal to Statement, 216 × 340 mm,

Envelope Monarch, Envelope #10, Envelope DL, Envelope C5, Executive, Envelope #9, Envelope #6, ISO B5, Oufuku

Hagaki, Oficio II, 16K, Folio, Youkei 2, Youkei 4 and Custom. Be sure to use the multi purpose tray when you print on any

special paper.

The capacity of the multi purpose tray is as follows.

• A4 or smaller plain paper (80 g/m²): 100 sheets

• Hagaki: 1 sheet

• OHP film: 1 sheet

• Envelope DL, Envelope C5, Envelope #10 (Commercial #10), Monarch, Youkei 4, Youkei 2: 5 sheets

• Folio: 20 sheets

• Thick paper: 5 sheets

1 Fan the media (paper/transparencies), then tap it on a level surface

to avoid media jams or skewed printing.

2 Pull the MP tray towards you until it stops.

IMPORTANT When using media types other than plain paper (such as recycled or colored paper), always specify

the media type setting. (Refer to Media Type (Paper type setting for the MP tray) on page 4-27.) If you are using a

paper weight of 106 g/m² or more, set the media type to Thick.

Note When you use special paper such as transparencies or thick paper, select the media type by referring to

Media Type (Paper type setting for the MP tray) on page 4-27.

MP Tray

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 311 312

Sin comentarios

Utax P-4030DN Manual de usuario Pagina 47