Utax P-4030DN Manual de usuario descargar pdf (Pagina 127)

4-67

Operation Panel

3 Press  or  to select the connection mode.

4 Press [OK]. The Custom Setup menu reappears.

Channel (Channel settings)

This sets the Channel to be used in the wireless network.

1 In the Custom Setup menu, press  or  to select Channel.

2 Press [OK]. The Channel screen appears.

3 Enter the Channel number using the numeric keys,  or .

4 Press [OK]. The Custom Setup menu reappears.

Netwk Authentic. (Network Authentication setting)

This sets the authentication method to be used when connecting to an access point.

1 In the Custom Setup menu, press  or  to select Netwk

Authentic..

2 Press [OK]. The Netwk Authentic. screen appears.

The available authentication methods are as follows:

Open

Shared

WPA-PSK

WPA2-PSK

3 Press  or  to select the desired authentication method.

4 Press [OK]. The Custom Setup menu reappears.

Encryption (Encryption settings)

This selects the encryption settings.

1 In the Custom Setup menu, press  or  to select Encryption.

Note The Channel can be set between 1 and 11.

Channel:

(1 - 11)

/11-

Note You can also configure the network authentication setting for WPA-Enterprise and WPA2-Enterprise using

the web page of the optional wireless network interface kit (IB-51). For details, refer to the IB-51 User's Manual.

Note WPA-PSK and WPA2-PSK are only displayed when

Infrastructure has been set as the Connection mode

(Switch between connection modes) on page 4-66.

Netwk Authentic.:

********************-

Shared

WPA-PSK

*Open

Note This setting is not displayed when the setting for Netwk Authentic. (Network Authentication setting) on page

4-67 is set to use an authentication method other than Open, Shared, WPA-PSK and WPA2-PSK, using Utility.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 311 312

Sin comentarios

Utax P-4030DN Manual de usuario Pagina 127